BLONDE OAK - Floating Shelves

Includes Oak Floating Shelf + Floating Shelf Bracket + Pack of Screws

The OAK FLOATING SHELF range come in pre-sized lengths and widths, or can be customised to your space if you have a particular requirement.

When you order, you will receive the shelf, a floating shelf bracket and timber screws. The shelf has been been pre drilled to fit the bracket pegs. The rear edge has been slotted, so the shelf hides the bracket and fits snug against your wall.

Timber Species:

Made from solid Blonde Oak (American Red Oak) timber, each piece is finished to the highest standard.

We give you an option for the edge profile of the shelf, and apply a water and heat resistant, durable oil in semi-matte finish (a more natural look).

Timber appearance:

Our images of our woods are only a representation of the final piece you will receive.

Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins.

Also, the difference in computer screen and device tones may affect the visual representation.

We don't accept responsibility for our wood colour not meeting your expectations.

For more info click our timbers

Maintenance:

Clean with warm soapy water only.

Don’t store harsh chemicals on our products.

For a guide on caring for your timber click here

PLEASE NOTE: 27cm wide shelves will have two boards laminated together to achieve the desired width. ie: not one solid board.

Lengths:
190cm | 180cm | 170cm | 160cm | 150cm | 140cm | 130cm | 120cm | 110cm | 100cm | 90cm | 80cm | 70cm | 60cm | 50cm | 40cm | 30cm

Widths:
13cm | 19cm | 27cm

Thickness
3cm

All sizes are close approximates only.

FLOATING SHELF INSTALLATION INSTRUCTIONS - CLICK HERE

Each shelf comes with a bracket that is made by us, to fit your particular sized shelf. It is ready to be levelled and screwed directly to a flat wall, using our fixings provided.

We supply timber screws as standard with every order. Please see our Installation guide below for details on fixings and anchors to mount our shelves.

If you require specific anchors for your particular wall type:

UPGRADED FIXINGS PACKS are available here.

Each pack has 6 anchors / fixings designed for your particular wall type.

1 PACK (6 ANCHORS) WILL BE ENOUGH FOR MOST of our WALL MOUNTED PRODUCTS AND FLOATING SHELVES UNDER 1.5m.

LONGER SHELVES REQUIRE 2 PACKS (12 ANCHORS)

Weight Capacity:

Load ratings vary for each situation. Please refer to this guide for more info

Installation:

We recommend a qualified installer to install our shelves, however, any handy person should be able to install using our instructions provided here.

If no masonry or timber studs are available, it’s up to your discretion whether or not your wall will be able to handle the weight. We don’t recommend mounting our longer and wider shelves with just plasterboard wall plugs. If using only plasterboard wall plugs and screws, maximum weight will depend on the wall plugs you have used, the condition of your wall, and whether the wall plug has been installed correctly.

Welds and Wood accept no responsibility for the failed installation of your bracket and shelf.

*When installed using our install methods.

Our products are made to order.

Click here to find Current Production Times

Longer production times can occur in peak buying periods.

We ship Australia wide and times are calculated in business days, and begin after we have made, packaged and sent your order. Shipping times can vary depending on carrier delays, time of year etc.

Shipping to Perth - 1 day

Shipping to all other Capital Cities and most regional towns - 5 - 8 days

Shipping to remote or regional areas - Up to 2 weeks

As our products are made to order, we only accept cancellations of orders or changes of mind within 24 hours of purchase. Please choose carefully. Click here for full details

PLEASE READ OUR SAFETY GUIDE CLICK HERE

⚠️ Safety Warning – Wall Mounted Products

WARNING: Incorrect installation or misuse of wall-mounted shelves can result in serious injury or property damage.

• Shelves are not designed to support body weight
• Do not climb, hang, or pull on shelves
• Install only into structurally suitable walls using rated fixings
• Load capacity depends on wall type, fixings, and installation quality
• If unsure, installation must be completed by a qualified tradesperson

Always follow supplied installation instructions.

Failure to install or use this product correctly may result in product failure, damage, or injury.