PINE Floating Shelves
PINE FLOATING SHELVES - Large Floating Shelves
The PINE FLOATING SHELF range offers versatility with pre-sized lengths and widths or the option for custom dimensions to suit your specific space.
When you order, you will receive the shelf, a floating shelf bracket and timber screws. The shelf has been been pre drilled to fit the bracket pegs. The rear edge has been slotted, so the shelf hides the bracket and fits snug against your wall.
Crafted from solid Australian Pine, every shelf is finished to the highest standard. Choose your preferred edge profile to complement your style, and enjoy the natural beauty of the semi-matte finish. The durable oil applied is both water- and heat-resistant, providing a finish that is functional and long-lasting while maintaining a natural aesthetic.
If you prefer a shelf without a bracket, we are happy to supply the timber alone, tailored to your needs.
The PINE FLOATING SHELF is perfect for adding stylish, functional storage to your home, whether in the kitchen, bathroom, living room, or bedroom. Designed for easy installation and a polished look, these shelves are a timeless addition to any space.
LENGTHS:
170cm | 160cm | 150cm | 140cm | 130cm | 120cm | 110cm | 100cm | 90cm | 80cm | 70cm | 60cm | 50cm | 40cm | 30cm
WIDTHS:
13cm | 19cm | 27cm
THICKNESS:
3cm
IMPORTANT - PLEASE NOTE:
Weight capacity of up to 50kg depending on wall type, correctly installation of the bracket, and actual shelf weight. Installation instructions are available in our Support section. Brick walls and solid timber/steel stud attachments will carry the required weight. If you hang the shelf on timber/steel walls, a minimum of one screw must fasten into a stud. If no studs are available, it’s up to your discretion whether or not your wall will be able to handle the weight. We don’t recommend mounting our longer and wider shelves with just plaster board wall plugs. If sagging occurs, make sure you have tightened all fixings securely. If this fails, pack the underside of the bracket, (between the wall and the bracket) with matchsticks. This will angle the bracket up slightly and correct the sag. There will be a maximum of 20kgs load, including the shelf, if using just only plasterboard fixings (ie: no screws fixed into a timber or steel stud). Welds and Wood accept no responsibility for the installation of your shelf.
Our images of our woods are only a representation of the final piece you will receive. Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. Also, the difference in computer screen and device tones may affect the visual representation. We will try our best to accomodate your needs, however we don't accept responsibility for our wood colour not meeting your expectations.
Clean with warm soapy water. All materials are finished to the highest standard. Does not include accessories or plants in images.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
PINE FLOATING SHELVES - Large Floating Shelves
The PINE FLOATING SHELF range offers versatility with pre-sized lengths and widths or the option for custom dimensions to suit your specific space.
When you order, you will receive the shelf, a floating shelf bracket and timber screws. The shelf has been been pre drilled to fit the bracket pegs. The rear edge has been slotted, so the shelf hides the bracket and fits snug against your wall.
Crafted from solid Australian Pine, every shelf is finished to the highest standard. Choose your preferred edge profile to complement your style, and enjoy the natural beauty of the semi-matte finish. The durable oil applied is both water- and heat-resistant, providing a finish that is functional and long-lasting while maintaining a natural aesthetic.
If you prefer a shelf without a bracket, we are happy to supply the timber alone, tailored to your needs.
The PINE FLOATING SHELF is perfect for adding stylish, functional storage to your home, whether in the kitchen, bathroom, living room, or bedroom. Designed for easy installation and a polished look, these shelves are a timeless addition to any space.
LENGTHS:
170cm | 160cm | 150cm | 140cm | 130cm | 120cm | 110cm | 100cm | 90cm | 80cm | 70cm | 60cm | 50cm | 40cm | 30cm
WIDTHS:
13cm | 19cm | 27cm
THICKNESS:
3cm
IMPORTANT - PLEASE NOTE:
Weight capacity of up to 50kg depending on wall type, correctly installation of the bracket, and actual shelf weight. Installation instructions are available in our Support section. Brick walls and solid timber/steel stud attachments will carry the required weight. If you hang the shelf on timber/steel walls, a minimum of one screw must fasten into a stud. If no studs are available, it’s up to your discretion whether or not your wall will be able to handle the weight. We don’t recommend mounting our longer and wider shelves with just plaster board wall plugs. If sagging occurs, make sure you have tightened all fixings securely. If this fails, pack the underside of the bracket, (between the wall and the bracket) with matchsticks. This will angle the bracket up slightly and correct the sag. There will be a maximum of 20kgs load, including the shelf, if using just only plasterboard fixings (ie: no screws fixed into a timber or steel stud). Welds and Wood accept no responsibility for the installation of your shelf.
Our images of our woods are only a representation of the final piece you will receive. Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. Also, the difference in computer screen and device tones may affect the visual representation. We will try our best to accomodate your needs, however we don't accept responsibility for our wood colour not meeting your expectations.
Clean with warm soapy water. All materials are finished to the highest standard. Does not include accessories or plants in images.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
PINE FLOATING SHELVES - Large Floating Shelves
The PINE FLOATING SHELF range offers versatility with pre-sized lengths and widths or the option for custom dimensions to suit your specific space.
When you order, you will receive the shelf, a floating shelf bracket and timber screws. The shelf has been been pre drilled to fit the bracket pegs. The rear edge has been slotted, so the shelf hides the bracket and fits snug against your wall.
Crafted from solid Australian Pine, every shelf is finished to the highest standard. Choose your preferred edge profile to complement your style, and enjoy the natural beauty of the semi-matte finish. The durable oil applied is both water- and heat-resistant, providing a finish that is functional and long-lasting while maintaining a natural aesthetic.
If you prefer a shelf without a bracket, we are happy to supply the timber alone, tailored to your needs.
The PINE FLOATING SHELF is perfect for adding stylish, functional storage to your home, whether in the kitchen, bathroom, living room, or bedroom. Designed for easy installation and a polished look, these shelves are a timeless addition to any space.
LENGTHS:
170cm | 160cm | 150cm | 140cm | 130cm | 120cm | 110cm | 100cm | 90cm | 80cm | 70cm | 60cm | 50cm | 40cm | 30cm
WIDTHS:
13cm | 19cm | 27cm
THICKNESS:
3cm
IMPORTANT - PLEASE NOTE:
Weight capacity of up to 50kg depending on wall type, correctly installation of the bracket, and actual shelf weight. Installation instructions are available in our Support section. Brick walls and solid timber/steel stud attachments will carry the required weight. If you hang the shelf on timber/steel walls, a minimum of one screw must fasten into a stud. If no studs are available, it’s up to your discretion whether or not your wall will be able to handle the weight. We don’t recommend mounting our longer and wider shelves with just plaster board wall plugs. If sagging occurs, make sure you have tightened all fixings securely. If this fails, pack the underside of the bracket, (between the wall and the bracket) with matchsticks. This will angle the bracket up slightly and correct the sag. There will be a maximum of 20kgs load, including the shelf, if using just only plasterboard fixings (ie: no screws fixed into a timber or steel stud). Welds and Wood accept no responsibility for the installation of your shelf.
Our images of our woods are only a representation of the final piece you will receive. Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. Also, the difference in computer screen and device tones may affect the visual representation. We will try our best to accomodate your needs, however we don't accept responsibility for our wood colour not meeting your expectations.
Clean with warm soapy water. All materials are finished to the highest standard. Does not include accessories or plants in images.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
