OAK Floating Shelves
OAK FLOATING SHELVES - Timber Floating Shelves
The OAK FLOATING SHELF range come in pre-sized lengths and widths, or can be customised to your space if you have a particular requirement.
When you order, you will receive the shelf, a floating shelf bracket and timber screws. The shelf has been been pre drilled to fit the bracket pegs. The rear edge has been slotted, so the shelf hides the bracket and fits snug against your wall.
Made from solid Australian Tasmanian Oak wood, each piece is finished to the highest standard. We give you an option for the edge profile of the shelf, and apply a water and heat resistant, durable oil in semi-matte finish (a more natural look).
Please let us know if you would prefer a shelf without the bracket, and we will just supply the timber.
LENGTHS:
170cm | 160cm | 150cm | 140cm | 130cm | 120cm | 110cm | 100cm | 90cm | 80cm | 70cm | 60cm | 50cm | 40cm | 30cm
WIDTHS:
13cm | 19cm | 27cm
THICKNESS:
3cm
IMPORTANT - PLEASE NOTE:
Weight capacity of up to 50kg depending on wall type, correctly installation of the bracket, and actual shelf weight. Installation instructions are available in our Support section. Brick walls and solid timber/steel stud attachments will carry the required weight. If you hang the shelf on timber/steel walls, a minimum of one screw must fasten into a stud. If no studs are available, it’s up to your discretion whether or not your wall will be able to handle the weight. We don’t recommend mounting our longer and wider shelves with just plasterboard wall plugs. If sagging occurs, make sure you have tightened all fixings securely. If this fails, pack the underside of the bracket, (between the wall and the bracket) with matchsticks. This will angle the bracket up slightly and correct the sag. There will be a maximum of 20kgs load, including the shelf, if using just only plasterboard fixings (ie: no screws fixed into a timber or steel stud). Welds and Wood accept no responsibility for the installation of your shelf.
Our images of our woods are only a representation of the final piece you will receive. Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. Also, the difference in computer screen and device tones may affect the visual representation. We will try our best to accomodate your needs, however we don't accept responsibility for our wood colour not meeting your expectations.
Clean with warm soapy water. All materials are finished to the highest standard. Does not include accessories or plants in images.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
OAK FLOATING SHELVES - Timber Floating Shelves
The OAK FLOATING SHELF range come in pre-sized lengths and widths, or can be customised to your space if you have a particular requirement.
When you order, you will receive the shelf, a floating shelf bracket and timber screws. The shelf has been been pre drilled to fit the bracket pegs. The rear edge has been slotted, so the shelf hides the bracket and fits snug against your wall.
Made from solid Australian Tasmanian Oak wood, each piece is finished to the highest standard. We give you an option for the edge profile of the shelf, and apply a water and heat resistant, durable oil in semi-matte finish (a more natural look).
Please let us know if you would prefer a shelf without the bracket, and we will just supply the timber.
LENGTHS:
170cm | 160cm | 150cm | 140cm | 130cm | 120cm | 110cm | 100cm | 90cm | 80cm | 70cm | 60cm | 50cm | 40cm | 30cm
WIDTHS:
13cm | 19cm | 27cm
THICKNESS:
3cm
IMPORTANT - PLEASE NOTE:
Weight capacity of up to 50kg depending on wall type, correctly installation of the bracket, and actual shelf weight. Installation instructions are available in our Support section. Brick walls and solid timber/steel stud attachments will carry the required weight. If you hang the shelf on timber/steel walls, a minimum of one screw must fasten into a stud. If no studs are available, it’s up to your discretion whether or not your wall will be able to handle the weight. We don’t recommend mounting our longer and wider shelves with just plasterboard wall plugs. If sagging occurs, make sure you have tightened all fixings securely. If this fails, pack the underside of the bracket, (between the wall and the bracket) with matchsticks. This will angle the bracket up slightly and correct the sag. There will be a maximum of 20kgs load, including the shelf, if using just only plasterboard fixings (ie: no screws fixed into a timber or steel stud). Welds and Wood accept no responsibility for the installation of your shelf.
Our images of our woods are only a representation of the final piece you will receive. Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. Also, the difference in computer screen and device tones may affect the visual representation. We will try our best to accomodate your needs, however we don't accept responsibility for our wood colour not meeting your expectations.
Clean with warm soapy water. All materials are finished to the highest standard. Does not include accessories or plants in images.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
OAK FLOATING SHELVES - Timber Floating Shelves
The OAK FLOATING SHELF range come in pre-sized lengths and widths, or can be customised to your space if you have a particular requirement.
When you order, you will receive the shelf, a floating shelf bracket and timber screws. The shelf has been been pre drilled to fit the bracket pegs. The rear edge has been slotted, so the shelf hides the bracket and fits snug against your wall.
Made from solid Australian Tasmanian Oak wood, each piece is finished to the highest standard. We give you an option for the edge profile of the shelf, and apply a water and heat resistant, durable oil in semi-matte finish (a more natural look).
Please let us know if you would prefer a shelf without the bracket, and we will just supply the timber.
LENGTHS:
170cm | 160cm | 150cm | 140cm | 130cm | 120cm | 110cm | 100cm | 90cm | 80cm | 70cm | 60cm | 50cm | 40cm | 30cm
WIDTHS:
13cm | 19cm | 27cm
THICKNESS:
3cm
IMPORTANT - PLEASE NOTE:
Weight capacity of up to 50kg depending on wall type, correctly installation of the bracket, and actual shelf weight. Installation instructions are available in our Support section. Brick walls and solid timber/steel stud attachments will carry the required weight. If you hang the shelf on timber/steel walls, a minimum of one screw must fasten into a stud. If no studs are available, it’s up to your discretion whether or not your wall will be able to handle the weight. We don’t recommend mounting our longer and wider shelves with just plasterboard wall plugs. If sagging occurs, make sure you have tightened all fixings securely. If this fails, pack the underside of the bracket, (between the wall and the bracket) with matchsticks. This will angle the bracket up slightly and correct the sag. There will be a maximum of 20kgs load, including the shelf, if using just only plasterboard fixings (ie: no screws fixed into a timber or steel stud). Welds and Wood accept no responsibility for the installation of your shelf.
Our images of our woods are only a representation of the final piece you will receive. Please be aware that the wood may vary in grain, tone and may show natural timber features such as gum veins. Also, the difference in computer screen and device tones may affect the visual representation. We will try our best to accomodate your needs, however we don't accept responsibility for our wood colour not meeting your expectations.
Clean with warm soapy water. All materials are finished to the highest standard. Does not include accessories or plants in images.
D E L I V E R Y:
Our products are made to order.
* Longer production times may occur in peak buying periods.
ALL ORDERS WILL REQUIRE SIGNATURE UPON DELIVERY UNLESS OTHERWISE STATED.
This product is 100% Australian hand made by Adam and Anita from Welds & Wood.
